White Knight AT100, Owner'S Manual

Page: 26 / 40

Revision 10 25
Note: The following items are optional. However if ANY ONE item is selected, ALL must be
included
in the part order number. For example, if Leak Detection is desired but not Stroke Detection,
then Stroke
Detection must be noted as option “
A
”. If none are required then the part order number may be
submitted without any of these letters.
Stroke Detection
No Stroke Detection A
(ninth letter optional ) Fiber Optic (PNP) Sourcing B
Fiber Optic (NPN) Sinking C
Fiber Optic (No sensors) D
Solid State Pressure Switch E
Fiber Optic (Ports only) F
Dual Solid State Pressure
Switch

G

(please note that option “G” is only available when choosing option “E” on shuttle valve type)
Leak Detection
No Leak Detection A
(tenth letter optional ) Fiber Optic (PNP) Sourcing B
Fiber Optic (NPN) Sinking C
Fiber Optic (No sensors) D
Fiber Optic (Ports only)

E
Fiber Optic Ports W/ Leak Detect
Adapter F
Conductivity
2
G

( Ports are only required for internal muffler shuttle design, option C & D on shuttle valve type )
2
(Should not be used for explosion proof environment)
Base Plate
Standard A
(eleventh letter optional) Lever Lock Base plate B
(Lever Lock Base not available for AT Series)
Old rev level Specify rev level A
(twelfth letter optional)
(This option is added for customers requiring Copy Exact due to their ISO specifications. Pumps ordered without
the eleventh letter will be shipped the latest revision)
Order Notes
For example, an AT100 with straight front inlet, Top Straig
ht outlet, ½”Synchro-Flare inlet, ¾”
Synchro-Flare outlet, 3/8 fnpt straight air inlet, Ceramic shuttle valve, Adjustable Mufflers, and no Pulse
Dampener, no stroke Detection, no Leak Detection, and Standard Base Plate, would be ordered as
follows: AT100-ACBACAAAAAA. An AP100 with the same configuration would be ordered as follows:
AP100-ACBACAAAAAA. An AP100FM with the same configuration would be ordered as follows:
AP100FM-ACBACAAAAAA.