White Knight AT100, Owner'S Manual

Page: 17 / 40

Revision 10 16
Internal Muffler Design (Face Mounted)
External Muffler Design

For the external muffler design remove the 2 mufflers located on the sides of the shuttle
valve. Next insert the Leak Adapters into the two open ports. The 2 mufflers can now be
replaced into the ends of the Leak Adapters. Next remove the PFA Leak Detect Probes
from the PFA encapsulated fibers and screw them into the open ports until they become
snug. The PFA encapsulated fibers can then be re-inserted back into the probes until
they bottom out. The gripper nuts can then be tightened up to lock the PFA encapsulated
fibers into place.