•
Take off the rope at the top of the rudder and slide the rudder stock over the rudder, this should be a nice tight fit (1)
•
Make sure the bungee loops around the foil as this will help keep the foil up when sailing in shallow water
•
Put the rope back in, this will be used as a handle to pull up the rudders on the water
•
Loop the bungee over the bottom of the rudder and back thought the bobble this will hold the rudder up when on land (2)
•
Drop the rudder stock over the top pintle and slide the bolt thought the bottom pintle (make sure the tiller arm is bending inwards)
•
Tighten up, tight enough to stop any play in the stock but not so that is gives friction when steering
•
Clip the connecter bar to the two rudder stocks (3)
•
Clip on the tiller extension
Rudders
8
1
3
2
