14
OPERATION
8. Turn the inverter to the ON (I) position. Turn on the
equipment or appliance.
9. Plug the USB powered device into the inverter’s USB
power port.
10. The USB can be powered independantly of the inverter by
turning on the rocker switch to the USB (II) position.
NOTE:
Indicator LED will not illuminate in this position.
Note:
• The audible alarm may make a momentary “chirp” when
the inverter is turned OFF (O). The same alarm may
also sound when the inverter is being connected to or
disconnected from the 12 volt power source.
• The use of an extension cord from the inverter to the appliance
or equipment being operated will decrease the power being
delivered to the load. For best operating results, the extension
cord should be no more than 50 feet long.
• Check frequently to ensure that the input and output
connections are secure. Loose connections may damage the
inverter, the power source, or may generate excessive heat.
To generate the maximum output, the 3000 watt model (for
example) should be connected to a power supply which has
the capacity to produce up to 300 amps. The loads should be
distributed between the receptacles to ensure that each outlet
is producing no more than its maximum 1500 watt output.
If more than one piece of equipment or appliance is to be
operated at the same time, first turn on the inverter and then
turn on each piece of equipment or appliance separately to
enable the inverter to produce the required start up loads.
