Whispbar K704W, Fitting Instructions Manual

Page: 7 / 84

Fitting Kit
EN
K704W
Fitment
●
Open or remove fixed-point covers.
●
Ensure rubber gasket is pulled away from
fixed point block when installing clamp.
●
Place clamp into position as pictured.
●
Ensure spring washer is between clamp
and the head of the screw.
●
Using 5mm Hex Key supplied with this kit,
fully tighten to 5Nm (3.7 ft lb) hand tight.
●
Repeat for all four positions.
●
Assemble as shown.
7