background image

Fitting Kit

EN

K043W

LIMITED LIFETIME WARRANTY

Technical Assistance or Replacement Parts:  Contact your dealer or visit: www.whispbar.com or call (888) 925-4621 Monday through
Friday, 7:00am to 5:00pm, PST

This limited lifetime warranty covers all Whispbar-brand products* and rack components manufactured by Yakima Products, Inc.
(Yakima), and is effective for as long as the original retail purchaser owns the product. This warranty terminates when the original
retail purchaser sells or otherwise transfers the product to any other person. Subject to Yakima’s inspection of the product, Yakima
will remedy defects in materials and/or workmanship by repairing or replacing, at Yakima’s option, the defective product without
charge for parts or labor, subject to the limitations and exclusions described in this warranty. Yakima may elect, at its option, not to
repair or replace a defective product, in which case Yakima will issue to the original retail purchaser, at Yakima’s option, either a
refund equal to the purchase price paid for the product, or a credit to be used toward the purchase of new Whispbar products or
rack components. This warranty does not cover problems caused by normal wear and tear (including, but not limited to, scratches,
dents, or aesthetic oxidation of surfaces), accidents, unlawful vehicle operation, or modifications or repairs not performed or
authorized by Yakima. In addition, this warranty does not cover problems resulting from conditions beyond Yakima’s control
including, but not limited to, theft, misuse, overloading, or failure to assemble, mount or use the product in accordance with
Yakima’s written instructions or guidelines included with the product or made available to the original retail purchaser. If a product is
believed to be defective, the original retail purchaser should contact the Whispbar dealer from whom it purchased the product, who
will give the original retail purchaser instructions on how to proceed. If the original retail purchaser is unable to contact the Whispbar
dealer, or the dealer is not able to remedy the defect, the original retail purchaser should contact Yakima by e-mail at:
[email protected], or phone 888.925.4621 for shipping instructions. Upon contacting Yakima directly, a Yakima technician
will provide the original retail purchaser with appropriate instructions for returning the product to Yakima. The original retail
purchaser will be responsible for the cost of mailing the product to Yakima. In order to receive any remedy under this warranty
(either from a Whispbar dealer, or from Yakima directly), proof of purchase in the form of an original purchase invoice or receipt is
strictly required.

LIMITATION OF LIABILITY
REPAIR OR REPLACEMENT OF A DEFECTIVE PRODUCT, OR THE ISSUANCE OF A REFUND OR CREDIT (AS DETERMINED BY YAKIMA), IS
THE ORIGINAL RETAIL PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY. DAMAGE OR INJURY TO THE ORIGINAL RETAIL
PURCHASER, TO HIS OR HER VEHICLE, CARGO, OR PROPERTY, AND/OR TO ANY OTHER PERSON OR PROPERTY IS NOT COVERED BY
THIS WARRANTY. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER EXPRESS WARRANTIES, WHETHER ORAL OR
WRITTEN.

YAKIMA’S SOLE LIABILITY IS LIMITED TO THE REMEDY SET FORTH ABOVE. IN NO EVENT WILL YAKIMA BE LIABLE FOR ANY DIRECT,
INDIRECT, CONSEQUENTIAL, INCIDENTAL, SPECIAL, EXEMPLARY, OR PUNITIVE DAMAGES OR FOR ANY OTHER DAMAGES OF ANY KIND
OR NATURE (INCLUDING, BUT NOT LIMITED TO, LOST PROFITS OR LOST SALES).
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

21

Summary of Contents for K043W
























Reviews: