manualshive.com logo in svg

whisker Litter-Robot 4, Instruction Manual

Share
Download
whisker Litter-Robot 4 Instruction Manual Download Page 23

www.whiskersupport.com

23

Distance 

Sensor

Drawer Full 

Indicator

Light Sensor

Automatic 

Night Light

Litter Level 

Additionally, the Distance Sensor is used to measure the litter level within the unit. If the unit is 
connected via the Whisker app (see page 26), it will send a notification when the litter level is 
above or below a specified threshold.

Automatic Night Light

Although cats generally have excellent vision, aging and illness can diminish their ability to 

see in low-light conditions. The Litter-Robot arrives with the Automatic Night Light function 
enabled. When the Light Sensor, located in the Control Panel, detects low-light conditions, 
the Night Light turns on automatically.  

A 3-second long press of the Reset button enters or exits Automatic Night Light Setting 

Mode. The Light Bar will indicate the current setting. Subsequent short presses of the Reset 
button will toggle through the settings shown below. After selecting the preferred setting, a 
3-second long press of the Reset button will save the setting.

Always OFF             1 Green Light displayed

Always ON             2 Green Lights displayed

Automatic             3 Green Lights displayed

Summary of Contents for Litter-Robot 4









































Reviews:

No comments

Brands by name

Popular brands

Load more brands