manualshive.com logo in svg

whisker Litter-Robot 4, Instruction Manual

Share
Download
whisker Litter-Robot 4 Instruction Manual Download Page 18

www.whiskersupport.com

18

Control Panel - Button Functions

Press the Power button to turn the unit power ON or OFF. When turning the unit ON, the Light 

Bar will flash white, then the unit will perform a Clean cycle with a sequential round robin 
yellow Light Bar indicating the direction of rotation.

With the unit powered ON, a 3-second long press of the Power button will turn the unit OFF.

Press the Cycle button to start a Clean cycle (see page 16). Press the Cycle button again to 

pause or resume the cycle.   
A 3-second long press will activate the default 8-Hour Sleep Mode (see page 24). The Light 
Bar will change to purple, indicating Sleep Mode is enabled for the next 8 hours. To exit this 
mode, press and hold the Cycle button for 3 seconds. The Light Bar will change to blue, 
indicating the mode has been disabled.  

Power Button

Cycle (8-Hour Sleep Mode)

Power 

Cycle

Reset  Empty Connect 

Light Bar 

Summary of Contents for Litter-Robot 4









































Reviews:

No comments

Brands by name

Popular brands

Load more brands