8
Step 4) Controls and Volume setting
Set each of the four knobs at the upper-right of the rear of the speaker
(fronts only) to the 12-o’clock position to begin with. You can adjust these
settings to your personal preference once you start listening to the
speakers and determine any adjustments required for the room.
Step 5) Power Up
Connect either the IEC power cable to the back of the speaker (front /
rear), and the other end into the wall socket and turn on. Make sure you
are not playing any audio when you turn the speakers on, as you will not
know what volume to expect the first time and may damage your
equipment.
The Whise logo at the front of the speaker will turn blue when there is a
signal present. The speaker will go into standby mode after 2 minutes of
zero input, and the logo will change to amber.
Congratulations! You are now ready to experience audio at its finest! Refer to the
Audio Configuration section for more information on adjusting the Whise 1500
HD-A
®
loudspeaker to your room and taste.