Whirlwind
– K5 – User Manual – P. 7
Attaching Handle Bars:
The Kickscooter will arrive without the
handlebars being attached so this is
something that the user must do.
To do this, align each handle bar to
the grooves found in the left and right
handle bar socket. Rotate each
handle anticlockwise until it is tightly
secured in each groove.
Attach Kickstand:
To attach the kickstand to the Kickscooter, use
the Allen Key provided and loosen the small
screws in the area where the kickstand should
go (please refer to the images provided as
reference). Then, insert these screws into the
holes on the kickstand and fasten it again onto
the Kickscooter.