Whirlwind
– K5 – User Manual – P. 8
3. Preparation before use
3.1 Battery Charging Process
•
Ensure that the charging port is dry and free from dust/dirt.
•
Plug the charging cable into the Scooter, make sure the green indicator lights are shown on the charger,
then connect the cable to the power supply (110V~240V; 50/60 Hz)
•
The red light indicates that the Scooter is charging, the green light indicates that the Scooter is fully
charged.
•
When the green light is shown on the charger, disconnect the charger from the Scooter as over-
charging will affect/decrease the lifetime of the battery.
•
Follow the charging and storage instructions to avoid damaging the battery.
***WARNING***
•
USE ONLY THE CHARGER SUPPLIED WITH THE SCOOTER. DO NOT
OVER-CHARGE.
