Whirlwind - H7 – User Manual – P. 9
5. Connect the Main Frame to the
HoverBoard.
a) To do this, use the Velcro Straps supplied.
b) Place the Main Frame (now connected to the
Front Panel) on the HoverBoard, so that you
align the HoverBoard Bracket with the width of
the HoverBoard.
c) Once the above is aligned correctly, tighten
the bolts on the HoverBoard Bracket to ensure
that the HoverBoard does not move from side to
side.
d) Lastly, attach the Straps by feeding each
Strap through the corresponding hole in the
HoverBoard Bracket, passing underneath the
HoverBoard and tighten using the Velcro on
each Strap.
6. Make sure all parts are secured tightly and
are not going to move around during use
a) Make sure you test each part is secured
before use.
