Whirlwind - H7 – User Manual – P. 7
2.2 Assembly
1. Connect each Handle’s to the HoverBoard
Bracket on the Main Frame.
a) To do this, use 2 X 45mm Bolt and 2 X Anti-
Slip Nut for each Handle.
b) Align the 2 holes located on the bottom of the
Handle with the corresponding 2 holes found on
the HoverBoard Bracket and insert the 2 X
45mm Bolt and fasten with the 2 X Anti-Slip Nut
using an Allen Key.
c) Repeat this process for the other Handle.
2. Connect the Rear Stabilizer Wheel to the
Main Frame
a) To do this, insert the Rear Stabilizer Wheel
onto the rear tube of the Main Frame.
b) Make sure both parts are aligned so that you
can insert the large black 44mm Bolt through the
hole of the tube and tighten with an Anti-Slip nut
using an Allen Key.
