22
1.
Remove door from dryer
IMPORTANT:
If the protective fi lm has not yet been
removed from the dryer, peel the fi lm from the dryer door
before proceeding.
Using a T25
®
screwdriver, remove the four screws securing
the door hinge to the dryer and lift up and out to remove
the door. Place the door on a soft towel or other non-scratch
surface. Reinstall the four screws in the holes.
2.
Move the door strike
Using a T25
®
screwdriver, remove the two screws securing
the door strike to the door frame of the dryer. Rotate the strike
180° and attach to the opposite side of dryer door frame
as shown.
3.
Remove inner door from outer door
Position the door with the inside of the door facing up.
Using a Phillips screwdriver, remove the 10 screws securing
the inner door to the outer door. Lift off the inner door and
set aside.
4.
Remove hinge and latch
Using a T25
®
screwdriver, remove the three screws securing
the latch plate and latch backing plate and the fi ve screws
holding the hinge assembly in place.
Hinge
Latch
Reverse door swing: round-shaped door, curved glass – double handle
Summary of Contents for YWED85HEFC2
Page 2: ...2 DRYER SAFETY ...
Page 26: ...26 SÉCURITÉ DE LA SÉCHEUSE ...