18
8.
Reinstall hinge and latch
on opposite sides
Using a T25
®
screwdriver, reinstall the latch plate, latch
backing plate, and hinge assembly on the opposite sides
from which they were removed.
7.
Remove hinge and latch
Using a T25
®
screwdriver, remove the three screws securing
the latch plate and latch backing plate and the fi ve screws
holding the hinge assembly in place.
Hinge
Latch
6.
Rotate and reassemble outer window
assembly to trim ring
With the edge with two notches at the top, align the notches
on the outer window assembly with the tabs on the trim ring
and lower into place as shown in fi gure A. Rotate the outer
window assembly counterclockwise to lock tabs into place
(fi gure B). Using a Phillips screwdriver, secure with two
screws removed earlier.
IMPORTANT:
Do not overtighten.
Fig. A
Fig. B
Bottom
of door
Notches
Summary of Contents for YWED85HEFC2
Page 2: ...2 DRYER SAFETY ...
Page 26: ...26 SÉCURITÉ DE LA SÉCHEUSE ...