It is important to operate under strict compliance with user manual.
1
、
Overall clean-up of the washing machine
1 Use dry and soft cloth to cleanse the machine.
2 Add neutral detergent into cleansing when the smudge is severe.
3 Please do not spray water directly to the washing machine.
4 After washing, disengage the water inlet hose.
5 Unplug the power supply cord and hang it up.
6 Please do not store water in the wash tub for long. Drain the water instantly
after each use.
7 Use clean and soft cloth to wipe out the surface and tub. Please open the wash
lid for a while (approximately one hour) and then close it.
8
Hang up the drain hose.
2
、
Clean-up of lint filter
Take out the lint filter. Put it in the clean water while it is still wettish. Then make
a rinse and reinstall it again.
3
、
Spin-drying
During the process of spin-drying, altogether with the program of “Drain” or
“Water injection and rinsing”, it is suggested that about one minute of spin-drying
be conducted first and then you can carry out “Drain” or “Water injection and
rinsing” program. Otherwise, the spin-drying process is stopped due to over-
storage of water in spinning tub.
4
、
Icing precautions
1
After a thorough drain, switch water level selector to “Heavy” or “Normal”.
2
If it is in “Drain” position, the icing can hardly melt down.
5
、
When it is frozen
Put hot water below 50 in the washing tub and soak for certain minutes, then use
℃
your hand to slightly turn around the impeller. It is suggested to use the washing
machine when it can drain.
5
Summary of Contents for XWT-608
Page 6: ...6 ...
