Whirlpool WWPU75210, Instructions For Use Manual

Page: 20 / 60

20
Use and Care guide
• The washer dryer will calculate the time
needed for drying and the level of moisture
remaining in the laundry, according to the
load and drying type selected.
• Check that the tap is turned on and that the
discharge hose is positioned correctly.
• Press the START/PAUSE button (the display
will show the drying time remaining).
• When the programme is finished the word
“End” will appear on the display. After 5
minutes the appliance will go into standby
mode (on certain models, the display will
show two lines).
• Switch off the machine by turning the
programme selector to the OFF position.
• Open the door and remove the laundry.
• Turn off the tap.
CANCELLING THE DRYING PROGRAMME
• To cancel the drying programme, press and
hold the DRYING SELECTION button for
about 3 seconds.
In order to ensure the correct operation of the
appliance, it is advisable not to interrupt the
drying phase unless it is absolutely necessary.
WARNING:
Do not dry woollen garments or articles
with special padding (e.g. quilts, quilted
anoraks, etc.) and very delicate fabrics. If
garments are drip/dry, load less items as to
prevent creasing.
WARNING:
After cancelling the drying programme,
the cool down phase will begin and you
must wait for about 10/20 minutes before
opening the door.
The appliance calculates the time to the
end of the selected programme based upon
a standard loading. During the cycle, the
appliance corrects the time according to
the size and composition of the load.
During the drying phase the drum will
accelerate to a higher speed to distribute the
load and to optimize the drying performance.