2
Lightly soiled
fabrics
Quick Wash
Hot
Warm
Cool
Cold
Tap Cold
High
Use this cycle to quickly clean small loads of lightly soiled
fabrics.
Swimsuits and
items requiring
rinsing without
detergent
Rinse & Spin
Cold
High
Combines a rinse and spin for loads requiring an additional
rinse cycle or to complete a load after power interruption.
Also use for loads that require rinsing only.
Hand-washed items
or dripping-wet
items
Drain & Spin
N/A
High
This cycle uses a spin to shorten drying times for heavy
fabrics or special-care items washed by hand. Use this cycle
to drain washer after canceling a cycle or completing a cycle
after a power failure.
No clothes in
washer
Clean
Washer
Hot
Low
Use this cycle every 30 washes to keep the inside of your
washer fresh and clean. This cycle uses a higher water level.
Use with liquid chlorine bleach to thoroughly clean the inside
of your washer. This cycle should not be interrupted. See the
“Washer Care” section.
IMPORTANT:
Do not place garments or other items in the
washer during the Clean Washer cycle. Use this cycle with
an empty wash tub.
Heavily soiled
fabrics
Soak
Hot
Warm
Cool
Cold
Tap Cold
No Spin
Use this cycle to soak small spots of set-in stains on fabrics.
The washer will use intermittent agitation and soaking. After
time has expired, water will drain, but the washer will not
spin. Cycle is complete.
NOTE:
If you are using fabric softener, be sure to turn the Rinse knob to either One Rinse with Fabric Softener or Two Rinses with Fabric
Softener.
*All rinses are cold.
†Efficient use of resources, such as energy and water.
