5.
Unscrew the screw fastening the top hinge pin.
Turn the pin by 180° and then fix it, screwing it
on the left side of the top hinge. (Fig.
5
)
6.
Assemble the top hinge and the hinge cover on
the left side. (Fig.
6
)
7.
Replace the top bushing and its bushing-cover.
(Fig.
7
) (use the bushing-cover contained in the
user manual bag). Remove the bottom stop
and bushing and fit them on the left side.
(Fig.
7
)
7.1
Remove the covers of the door handle. Unscrew
the screws fastening the door handle. Fit the
handle on the right side by performing the
sequence described above in reverse order.
(Fig.
7
/ Detail
A
) (for the “New Emotion” design
only)
8.
Remove the top bushing and insert it into the
left hole. Remove the right door striker and
mount the left one (in the user manual bag) on
the left. (Fig.
8
)
8.1
Remove the covers of the door handle. Unscrew
the screws fastening the door handle. Fit the
door handle on the right side by performing the
sequence described above in reverse order.
(Fig.
8
/ Detail
A
) (for the “New Emotion” design
only)
9.
Turn the middle hinge 180º. Fit the freezer and
refrigerator doors together with the middle
hinge (proceed in reverse order to the
sequence described in point 2). Fix the middle
hinge by tightening the screws. Finally, using a
knife, cut the left side of the kickboard and
install it. (Fig.
9
)
Fig. 5
Rotate the top hinge
pin by 180
o
Fig. 6
Fig. 7
Detail A
REFRIGERATOR
DOOR
Fig. 8
Detail A
FREEZER DOOR
Left striker
Right striker
Fig. 9
Turn the middle
hinge 180
o
19
