16
Customizing Features / Options
12 OR 24 HOUR CLOCK
All time displays are shown in standard clock time
(AM and PM) at the 12 hour default setting. If 24
hour clock displays are desired, follow steps below:
1
. Press the PROGRAM button and hold for three
seconds, until the “Recharge Time” screen (Figure
31) is displayed.
4
. Press the
r
UP or
s
DOWN buttons to select the
time format.
5
. Press the PROGRAM button twice to return to the
normal time of day screen.
GALLONS OR LITERS
All water flow rate and usage displays are in gallons
with the default “GALS” setting. If reset to “LITER”,
the same displays are shown in liters.
1
. Press the PROGRAM button and hold for three
seconds, until the “Recharge Time” screen (Figure
31) is displayed.
2
. Again, press the PROGRAM button and hold for
three seconds, until the model code screen (Figure
32) is displayed.
3
. Once in this display, press the PROGRAM button
twice and one of the two displays in Figure 34 is
shown.
FIG. 33
FIG. 34
4
. Press the
r
UP or
s
DOWN buttons to select
gallons or liters.
5
. Press the PROGRAM button once again to return
to the normal time of day screen.
Routine Maintenance
WATER SOFTENER CLEANSER
The manufacturer recommends that you use
Whirlpool
®
WHE-WSC Water Softener Cleanser, as
directed, every four months.
Lift the brinewell cover and pour in the entire 16 oz.
bottle of Whirlpool
®
Water Softener Cleanser. Press
the RECHARGE button and hold for three seconds,
until “RECHARGE” begins to flash in the display.
This manual recharge will take about two hours. If
taste, odor, or discoloration are detected in the water,
manually recharge the softener again, then run a cold
water faucet immediately downstream of the softener
until water tastes, smells and appears normal.
FIG. 31
FIG. 32
2
. Again, press the PRO-
GRAM button and hold
for three seconds, until
the model code screen
(Figure 32) is displayed.
3
. Once in this display,
press the PROGRAM
button again and one of
the two displays in
Figure 33 is shown.
