Whirlpool WFC8090GX, Service Manual, Page: 78 / 82

5-4
n
Whirlpool Smart All-In-One Washer & Dryer
CONNECTIVITY
WPS Connectivity Instructions
Setup
IMPORTANT: Proper installation of the washer/dryer prior to
use is the consumer responsibility. Be sure to read and follow
the Installation Instructions that came with the washer/dryer.
Automatic Setup Instructions –
WiFi Protected Setup (WPS)
You will need:
n
A home wireless router supporting WiFi, 2.4Ghz with WPA2
security. If you are unsure of the router’s capabilities, refer
to the router manufacturer’s instructions.
n
The router to be on and have a live internet connection.
n
The 10-character SAID code for the appliance. The SAID
code is either printed on a label on the appliance or can be
found on the LCD screen. Refer to “General Information”
section of this manual for the location.
NOTE: If the home wireless router is not equipped with a WPS
button, please check the user manual of the router to confirm
if it is WPS capable. If not, alternate setup instructions are at
www.whirlpool.com/connect.
1. Router Setup
47
IMPORTANT: Proper installation of your washer/dryer prior to use is your responsibility. Be sure to read and follow the Installation
Instructions that came with your washer/dryer.
Automatic Setup Instructions – Wi-Fi Protected Setup (WPS)
Press the WPS button on the router. An indicator light will
begin blinking.
HELPFUL TIP: The WPS function on your router is active
for 2 minutes. Complete the next step within that timeframe
or you will need to reinitiate WPS.
1.
Router setup
INTERNET
WI-FI PROTECTED
SETUP (WPS)
HOME WIRELESS
ROUTER
Touch the POWER button (A) to turn on the washer/dryer,
then touch the CONNECTED button (C).
The Wi-Fi status indicator (B) on the washer/dryer control panel
will blink slowly while your washer and router attempt
to connect. The Time/Status display (D) will show a “sensing
animation.” This can take up to 2 minutes.
If the connection is successful, the Wi-Fi status indicator will
come on and remain lit.
If Your Washer/Dryer Doesn’t Connect
If your washer/dryer and router fail to connect after 2 minutes,
the Wi-Fi status indicator (C) will blink rapidly for 2 seconds
and then turn off. Refer to the “Troubleshooting — Connectivity”
section of this Use & Care Guide and Installation Instructions,
check any connection instructions for your specifi c router, and
refer to alternate instructions at www.whirlpool.com/connect .
2.
Washer/dryer setup (time sensitive step)
Setup
You will need:
• A home wireless router capable of Wi-Fi Protected Setup
(WPS). The router should be on and have a live Internet
connection.
• The Smart Appliance ID (SAID) from your washer/dryer.
This is located on a sticker inside the washer/dryer door .
NOTE: If your home wireless router is not equipped with a WPS
button, please check the user manual of your router to confi rm
if it is WPS capable. If not, alternate setup instructions are at
www.whirlpool.com/connect .
A C B
Temperature
WARM
Spin Speed
EXTRA FAST
Auto Dry
Dry
What to Wash
REGULAR
How to Wash
NORMAL
4:28
3:15
A
C
C
B
B
May need to add verbiage about 180° signal radiation pattern for
connectivity, per Brian Evens
Press the WPS button on the router. An indicator light will
begin blinking.
HELPFUL TIP: The WPS function on the router is active for 2
minutes. Complete the next step within that timeframe or you
will need to reinitiate WPS.
2. Washer/Dryer setup (time sensitive step)
47
IMPORTANT: Proper installation of your washer/dryer prior to use is your responsibility. Be sure to read and follow the Installation
Instructions that came with your washer/dryer.
Automatic Setup Instructions – Wi-Fi Protected Setup (WPS)
Press the WPS button on the router. An indicator light will
begin blinking.
HELPFUL TIP: The WPS function on your router is active
for 2 minutes. Complete the next step within that timeframe
or you will need to reinitiate WPS.
1.
Router setup
INTERNET
WI-FI PROTECTED
SETUP (WPS)
HOME WIRELESS
ROUTER
Touch the POWER button (A) to turn on the washer/dryer,
then touch the CONNECTED button (C).
The Wi-Fi status indicator (B) on the washer/dryer control panel
will blink slowly while your washer and router attempt
to connect. The Time/Status display (D) will show a “sensing
animation.” This can take up to 2 minutes.
If the connection is successful, the Wi-Fi status indicator will
come on and remain lit.
If Your Washer/Dryer Doesn’t Connect
If your washer/dryer and router fail to connect after 2 minutes,
the Wi-Fi status indicator (C) will blink rapidly for 2 seconds
and then turn off. Refer to the “Troubleshooting — Connectivity”
section of this Use & Care Guide and Installation Instructions,
check any connection instructions for your specifi c router, and
refer to alternate instructions at www.whirlpool.com/connect .
2.
Washer/dryer setup (time sensitive step)
Setup
You will need:
• A home wireless router capable of Wi-Fi Protected Setup
(WPS). The router should be on and have a live Internet
connection.
• The Smart Appliance ID (SAID) from your washer/dryer.
This is located on a sticker inside the washer/dryer door .
NOTE: If your home wireless router is not equipped with a WPS
button, please check the user manual of your router to confi rm
if it is WPS capable. If not, alternate setup instructions are at
www.whirlpool.com/connect .
A C B
Temperature
WARM
Spin Speed
EXTRA FAST
Auto Dry
Dry
What to Wash
REGULAR
How to Wash
NORMAL
4:28
3:15
A
C
C
B
B
May need to add verbiage about 180° signal radiation pattern for
connectivity, per Brian Evens
Touch the POWER button (A) to turn on the washer/dryer,
then touch the CONNECTED button (C).
The WiFi status indicator (B) on the washer/dryer control
panel will blink slowly while the washer and router attempt
to connect. The Time/Status display will show a “sensing
animation.” This can take up to 2 minutes.
If the connection is successful, the WiFi status indicator will
come on and remain lit.
If The Washer/Dryer Doesn’t Connect
If the washer/dryer and router fail to connect after 2 minutes,
the WiFi status indicator (C) will blink rapidly for 2 seconds
and then turn off. Refer to the “Troubleshooting Guide” in
this section on page 5-6, check any connection instructions
for your specific router, and refer to alternate instructions at
www.whirlpool.com/connect.