10
MAINTENANCE & CLEANING
C
LEANING
IS
THE
ONLY
MAINTENANCE
normally re-
quired.
F
AILURE
TO
MAINTAIN
THE
DRAWER
in a clean condi-
tion could lead to deterioration of the surface
that could adversely affect the life of the ap-
pliance and possibly result in a hazardous sit-
uation.
D
O
NOT
USE
METAL
SCOURING
PADS
,
A
BRASIVE
CLEANSERS
,
steel-wool
pads, gritty washcloths, etc.
which can damage the control
panel, and the interior and
exterior drawer surfaces. Use a sponge with a
mild detergent or a paper towel with spray glass
cleaner. Apply spray glass cleaner to a paper
towel.
D
O
NOT
SPRAY
directly on the drawer.
A
T
REGULAR
INTERVALS
,
especially if spill
overs have occurred, remove the
antislip cloth and wipe the interi-
or of the drawer clean.
S
ALTS
ARE
ABRASIVE
and if deposited in the draw-
er compartment, rust could develop in plac-
es. Acid sauces like ketchup, mustard or salted
foods e.g. cured roasts, contain chloride and
acids. These affect steel surfaces. It’s a good
idea to clean the cooled down drawer cavity
after each use.
A
LSO
,
DO
NOT
USE
:
detergents containing soda,
acids or chlorides, abrasive detergents (in pow-
der or lotion), abrasive sponges (e.g. steel
wool) or sponges containing residuals of abra-
sive detergents, descaling detergents, dish-
washer detergents, oven sprays.
D
O
NOT
ALLOW
GREASE
or food particles to build
up around the door and door seal. Failure to
keep the seal clean may result in damage on
the fronts or adjacent units, due to the door
not closing properly during operation.
GENERAL
U
SE
A
MILD
DETERGENT
,
water and a soft cloth to
clean the interior surfaces, front and rear of the
door and the door opening.
ANTISLIP DRAWER BASE
I
T
IS
ADVISABLE
to clean the bottom of the draw-
er after every use, making sure to allow it to
cool. In this way grime will not accumulate and
cleaning is easier.
T
HE
ANTISLIP
FELT
can be pulled out to clean the
bottom of the drawer. The base can be washed
by hand with hot water and a mild detergent.
Dry thoroughly. Wash the antislip felt at 40°C
and let drip dry. Refit the antislip felt in the
drawer only when completely dry.
