7
Style 2 - Electronic Controls
Adjust the Doors
Your refrigerator has two front adjustable rollers – one on the right
and one on the left. If your refrigerator seems unsteady or you
want the doors to close easier, adjust the refrigerator's tilt using
the instructions below.
Depending on your model, your refrigerator may have leveling
legs (Style 1) or leveling screws (Style 2). They are part of the front
roller assemblies which are found at the base of the refrigerator on
either side.
1. Turn the leveling legs or leveling screws to the right to raise
that side of the refrigerator or to the left to lower that side. It
may take several turns to adjust the tilt of the refrigerator.
NOTE: Having someone push against the top of the
refrigerator takes some weight off the leveling screws and
rollers. This makes it easier to adjust the screws.
2. Open both doors again and be sure that they close as easily
as you like. If not, tilt the refrigerator slightly more to the rear
by turning both leveling screws to the right. It may take several
more turns, and you should turn both leveling screws the
same amount.
Style 1
Door Removal & Replacement
A. Door Stop
C. Door Stop Screw
Top Hinge
Bottom Hinge
Center Hinge
D. Bottom Hinge
E.
5
/
16
" Hex-Head Hinge Screws
A. Door Stop
B. Door Stop Screw
D. Center Hinge
E.
5
/
16
" Hex-Head Hinge Screws
C. Spacer
F. Spacer
B. Spacer
A. Hinge Cover Screw
A
B
C
D
E
F
A
B
C
D
E
B. Hinge Cover
C.
5
/
16
" Hex-Head Hinge Screws
D. Wiring Harness
E. Top Hinge
F. Spacer
B
A
C
E
F
D
