COMPONENT ACCESS
Whirlpool
®
, Maytag
®
, Amana
®
, & IKEA
®
Refrigerators
n
4-5
Removing the Freezer Shelf
1.
Pick up the right side of the shelf and slide to the right as you
would normally do. The bar will go into the deep pocket of
the shelf holder.
2.
Now, take a needle nose pliers or you can try your fingers and
grab the bar on the LEFT and push the bar over to the right
until the end is exposed. Do this for both front and back.
Note:
At this point, the shelf can be dropped down and
removed. To put the shelf back in just reverse the process.
Accessing the Freezer
Evaporator and Components
1.
After removing the shelves, remove the six 1/4" (6.4 mm) hex
head screws, lift up on the panel and pull forward to remove.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
