Whirlpool W10554129C, Use & Care Manual

Page: 4 / 48

4
CONTROL PANEL AND FEATURES
Not all features and cycles are available on all models.
NOTE:
The control panel features a sensitive surface that
responds to a light touch of your finger. To ensure your selections
are registered, touch the control panel with your finger tip, not
your fingernail. When selecting a setting or option, simply touch
its name.
Spin
This washer automatically selects the spin speed based
on the cycle selected. Some preset speeds can be
changed.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds reduce wrinkling, but will leave
your load more damp.
Soil
The Soil setting (wash time) is preset for each wash
cycle. For most loads, use this preset soil level. When
you change the soil setting, the cycle time will increase
or decrease in the Estimated Time Remaining display.
For heavily soiled and sturdy fabrics, use the Soil setting
to select more wash time. For lightly soiled and delicate
fabrics, use the Soil setting to select less wash time.
Lower soil level settings will help reduce tangling and
wrinkling.
Presoak
Touch to add a Presoak time of your choice to a wash
cycle. Items will gently tumble through the detergent and
water for the selected time to help loosen tough stains.
OPTIONS
Touch to activate additional wash options or additional
features on the washer. Not all options are available on all
models.
Steam Clean
The Steam Clean option adds additional soak and wash
time to many cycles to help remove tough stains, as well
as a steam boost for added cleaning power.
An integrated heater helps to maintain optimal wash
temperatures. See the “Cycle Guide” for cycles that
allow the Steam Clean option.
Extra Rinse
Activate this option to add an extra rinse to most cycles.
NOTE: Some cycles include this feature as a default.
See “Cycle Guide” for details.
6
A
3
4
Models WFW86HE and WFW61HE
2
1
5
B E A C D
6
POWER
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
WASH CYCLE KNOB
Use your Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
An LED will light up for the cycle selected.
NOTE: The Clean Washer LED will flash when the washer
has run 30 wash cycles as a reminder to run the Clean
Washer cycle.
See “Cycle Guide” for detailed descriptions of cycles.
START
Touch and hold until the light above START comes on to
start a cycle, or touch once while a cycle is in process to
pause it. If you want to add a garment, you can touch START
when the “Add Garment” LED is on.
DELAY WASH
Use
+
and
–
to delay the start of the wash cycle by up to
12 hours. To turn off Delay Wash, use
+
and
–
to set the
delay time to “0,” or touch POWER.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed. Factors
such as load size, wash temperature, and water pressure
may affect the time shown in the display during the cycle.
Tightly packing garments, unbalanced loads, or excessive
suds may cause the washer to adjust the cycle time, as well.
Touch the desired option along the bottom of the display to
adjust settings. See “Cycle Guide” for available settings on
each cycle. Not all settings are available with all cycles.
Cycle Status Lights
For details, see “Cycle Status Lights”.
Wash Temp
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based
on the type of fabric and soils being washed. For best
results, follow the garment label instructions. All wash
temperatures feature a cold rinse.
1
2
3
4
5
B