Whirlpool W10356101A, Installation Instructions Manual

Page: 5 / 40

5
Parts needed:
(Not supplied with washer/dryer)
Alternate parts:
(Not supplied with washer/dryer)
Your installation may require additional parts. To order, please
refer to toll-free numbers on back page of your “Use and Care
Guide.”
If you have: You will need:
Overhead sewer Standard 20 gal. (76 L) 39" (990 mm)
tall Drain Tub or Utility Sink, Sump
Pump and Connectors (available from
local plumbing suppliers)
Floor drain Siphon break Part Number 285320,
Additional Drain Hose Part Number
285702, and Connector Kit Part Number
285442
1" (25 mm) standpipe 2" (51 mm) diameter to 1" (25 mm)
diameter Standpipe Adapter
Part Number 3363920,
Connector Kit Part Number 285835
Laundry tub or Sump pump system (if not already
standpipe taller than available)
96" (2.4 m)
Drain hose too short Extension Drain Hose
Part Number 285863,
Connector Kit Part Number 285835
Lint clogged drain Drain Protector Part Number 367031,
Connector Kit Part Number 285835
Water faucets 2 longer water fill hoses:
beyond reach 6 ft (1.8 m) Part Number 76314,
of fill hoses 10 ft (3.0 m) Part Number 350008
Inlet hoses with
flat washers
n
Vent clamps
n
Vent elbows and ductwork
n
Mobile Home Installation Kit
(Part Number 346764)
n
Metal exhaust system hardware
Check local codes, electrical supply and venting, and read
“Electrical Requirements” and “Venting Requirements” before
purchasing parts. Mobile home installations require metal
exhaust system hardware available for purchase from the
dealer from whom you purchased your washer/dryer. For
further information, please reference the “Assistance or
Service” section of the “Washer/Dryer Use and Care Guide.”
Optional equipment:
(Not supplied with washer/dryer)
Refer to your “Use and Care Guide” for information about
accessories available for your washer/dryer.