Whirlpool W10356101A, Installation Instructions Manual

Page: 17 / 40

17
If you are working in a closet or recessed area: move the
washer/dryer into its final location and remove cardboard from
under washer/dryer. Remove the access panel by removing
3 Phillips-head screws and one bumper, located at the top
of the access panel. Set panel, screws, and bumper aside.
Complete hookup of water hoses. Replace access panel upon
completion of washer/dryer installation.
5.
Move washer/dryer to final location
Turn on water faucets to check for leaks. A small amount of
water may enter washer. It will drain later.
6.
check for leaks
Secure drain hose to laundry tub leg, drain standpipe, or inlet
hoses for wall standpipe with shipping strap removed earlier.
7.
Secure drain hose
4.5"
(113 mm)
4.5"
(113 mm)
4.5"
(113 mm)
4.5"
(113 mm)
4.5"
(113 mm)
Laundry Tub Standpipe Wall