Whirlpool W10184516D, Installation Instructions Manual

Page: 29 / 64

29
ELECTRONIC CONTROL SETUP INSTRUCTIONS
Code Explanation
1. 00
MONEY COUNTER OPTION
This option is either NOT SELECTED “OFF” or
SELECTED “ON.”
1. 00 Not Selected “OFF.”
1. 0C Selected “ON.”
• Press the COLORS/DELICATES button
3 consecutive times to select “ON” and 3
consecutive times to deselect (Not Selected “OFF”).
Counter resets by going from “OFF” to “ON.”
1. C0 Selected “ON” and not able to be deselected.
• To select “ON” and not able to be deselected,
first select “ON,” then within 2 seconds, press the
COLORS/DELICATES button twice, the COTTON/
WHITES button once, and exit set-up mode.
• Press the PERM PRESS button once to advance to
next code.
2. 00 SPECIAL PRICING OPTIONS
This option is either NOT SELECTED “OFF” or
SELECTED “ON.”
2. 00 Not Selected “OFF.”
2. SP Selected “ON.”
• Press the COLORS/DELICATES button once to change
this selection.
If SPECIAL PRICING OPTION is selected, there is access to
codes “3.XX” through “9.XX.”
• Press the PERM PRESS button once to advance to
next code.
OPTIONS 3.XX – 9.XX TO USE IF SPECIAL PRICING
IS SELECTED
3. 06 SPECIAL CYCLE PRICE
3. 06 When the d.xx is set to d.00, this 3.xx value represents
the number of quarters (coin 1) needed to start
the dryer; may adjust from 0–39. Change this value
by pressing the COTTON/WHITES button. 3. 06 = 6
quarters = $1.50.
3. 01 When the d.xx is set to d.CS, this 3.xx value represents
the number of push-in actuations of the coin slide
to start the dryer. 3. 01 would equal one coin slide
actuation.
• Press the PERM PRESS button once to advance to
next code.
4. 05 SPECIAL DRY TIME
4. 05 When set to Coin Drop or Card Reader operation, the
dry time equals the Special Dry Time value multiplied
by the Special Cycle Price value. Example: 3 06 and
4 05 = (06 x 05 = 30 minutes).
4. 30 For coinslide or OPL operation, this value represents
the number of minutes for full vend price. Factory
default of 30 minutes. By pressing the COTTON/
WHITES button, the value can be adjusted from 1–99
minutes.
• Press the PERM PRESS button once to advance to
next code.
Code Explanation
5. 00
TIME-OF-DAY CLOCK, MINUTES
5. 00 This is the TIME-OF-DAY CLOCK, minute setting;
select 0–59 minutes by pressing the COTTON/WHITES
button.
• Press the PERM PRESS button once to advance to
next code.
6. 00 TIME-OF-DAY CLOCK, HOURS
NOTE: Uses military time or 24 hr. clock.
6. 00 This is the TIME-OF-DAY CLOCK, hour setting; select
0–23 hours by pressing the COTTON/WHITES button.
• Press the PERM PRESS button once to advance to
next code.
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7. 00 This is the start hour; 0–23 hours.
• Select START HOUR by pressing the
COTTON/WHITES button.
• Press the PERM PRESS button once to advance to
next code.
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock.
8. 00 This is the stop hour; 0–23 hours.
• Select STOP HOUR by pressing the COTTON/WHITES
button.
• Press the PERM PRESS button once to advance to
next code.
9. 10 SPECIAL PRICE DAY
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by “0” indicates no selection that particular
day (9. 10). A number followed by an “S” indicates
selected for that day (9. 1S). To change the value
of “0” and “S,” use the COLORS/DELICATES button.
Days of the week (1–7) are selected by pressing the
COTTON/WHITES button.
When exiting set-up code “9,” the display must show the
current day of week:
• Press the PERM PRESS button once to advance to
next code.
DISPLAY DAY OF WEEK CODE (selected)
10 Day 1 = Sunday 1S
20 Day 2 = Monday 2S
30 Day 3 = Tuesday 3S
40 Day 4 = Wednesday 4S
50 Day 5 = Thursday 5S
60 Day 6 = Friday 6S
70 Day 7 = Saturday 7S