background image

3

WASHER SAFETY 

You can be killed or seriously injured if you don't immediately 

 

You

 

can be killed or seriously injured if you don't follow 

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 

messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Read all instructions before using the washer.

 

Do not wash articles that have been previously

 

cleaned 

in, washed in, soaked in, or spotted with gasoline, 

dry-cleaning solvents, other flammable, or explosive 

substances as they give off vapors that could ignite or 

explode.

Do not add gasoline, dry-cleaning solvents, or other 

flammable, or explosive substances to the wash water. 

These substances give off vapors that could ignite or 

explode.

 

Under certain conditions, hydrogen gas may be 

produced in a hot water system that has not been used 

for 2 weeks or more. HYDROGEN GAS IS 

EXPLOSIVE. If the hot water system has not been 

used for such a period, before using the washing 

machine, turn on all hot water faucets and let the water 

flow from each for several minutes. This will release 

any accumulated hydrogen gas. As the gas is 

flammable, do not smoke or use an open flame during 

this time.   

 

Do not allow children to play on or in the washer. Close 

supervision of children is necessary when the washer is used 

near children.

 

Before the washer is removed from service or 

discarded, 

remove the door or lid.

 

 

Do not reach into the washer if the drum, tub or agitator is 

moving.

 

Do not install or store the washer where it will be exposed to 

the weather.

 

Do not tamper with controls.

 

Do not repair or replace any part of the washer or attempt any 

servicing unless specifically recommended in this manual or in 

published user-repair instructions that you understand and 

have the skills to carry out.

 

See “Electrical Requirements” for grounding instructions.

WARNING:

 

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

Summary of Contents for W10175588C

























Reviews: