background image

15

Normal

Use this cycle to wash loads of normally soiled cottons and 

linens. This cycle has high-speed spin.

Quick Wash

Use this cycle to wash small loads of 2-3 lightly soiled garments 

that are needed in a hurry. This cycle combines a shortened wash 

time and high-speed spin to shorten drying time. Large wash 

loads will result in the machine increasing the wash time. 

Delicate

Use this cycle to wash sheer fabrics and lingerie. This cycle has 

low-speed spin for gentle fabric care.

Use mesh garment bags to wash undergarments such as 

underwire bras, items with strings, and small items such as 

socks.

Clean Washer

Use the Clean Washer cycle once a month to keep the inside of 

your washer fresh and clean. This cycle uses a higher water level. 

Use with affresh™ washer cleaner tablet or liquid chlorine 

bleach to thoroughly clean the inside of your washing machine. 

This cycle should not be interrupted. See “Cleaning Your Washer.” 

IMPORTANT: Do not place garments or other items in the washer 

during the Clean Washer cycle. Use this cycle with an empty 

wash drum. 

Drain/Spin

Use this cycle to drain your washer or to drain and spin your 

wash load. The spin speed is preset to HIGH.

Rinse/Spin

Use this cycle to get a rinse and spin only. This cycle has high-

speed spin.
Rinse & Spin is useful for:

Loads that need rinsing only.
Adding fabric softener to a load using the fabric softener 

dispenser.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and 

Heavy soiled garments. This cycle combines a longer wash time 

and high-speed spin to shorten drying times. 

Casual

Use this cycle to wash loads of permanent press blends and 

synthetic fabrics. This cycle has a load cooling process to reduce 

wrinkling.

Normal Sounds

As with any new product, you will hear sounds that you are not 

accustomed to. You may hear various sounds when the door is 

locked or unlocked, and during the washing, rinsing, or spinning 

process. Between changes in wash actions, there will be 

momentary pauses. You will hear water spraying and splashing 

during the wash and rinse cycles. These new sounds and pauses 

are part of normal washer operation. See “Troubleshooting.”

Options and Modifiers

You can customize your wash by adding options to your cycle 

selections. Not all Options are available with all cycles. 

See the “Laundry Guide” section for an overview of possible 

options for each Wash Cycle selection.
If an option is available with a selected cycle, the light for that 

option will illuminate when selected.
If an option is unavailable with a selected cycle, there will be a 

blinking light. The light for that option will not illuminate when 

selected.

Delay Wash

Use this to begin the wash cycle later.

Select DELAY WASH until the desired time (in hours) shows in 

the Estimated Time Remaining display.
Select START. The countdown to the wash cycle will show in 

the display window.

Prewash

Prewash is an 18-minute soak phase that is added before the 

main wash. During prewash, there is only a small amount of 

tumbling.

Extra Rinse

An extra rinse can be used to aid in the removal of detergent or 

bleach residue from garments. This option provides an additional 

rinse with the same water temperature as in the normal rinse. You 

may select or deselect by pressing EXTRA RINSE.

Wrinkle Release

Use this option to increase the quantity of incoming water and 

decrease the spin speed and duration in the rinse period. The last 

spin phase will have a lower spin speed and last a shorter time.

Summary of Contents for W10175588C

























Reviews: