Replacing battery
1. Remove battery holder from back of remote.
2. Insert new battery correct side up.
3. Replace cover.
Remove the transparent sheet protecting battery power.
The battery is pre-installed in the remote control.
About the battery
Ŝ!
One CR2032 battery is required
Ŝ!
Battery lifetime is about six months. It needs changing when remote signal fails.
As the battery will have been in stock for some time, its life may be less for first use.
Ŝ!
Incorrect handling of battery may cause electric shock, fire, fluid leakage, heat or
explosion.
Do not short-circuit, disassemble, heat it or burn it.
Remove when not in use for long periods.
Installing remote control battery
Using the remote control
㨙
Receiver
Transmitter
Transparent sheet
B pole must
align with mark on holder
To prevent damage:
Ŝ
Do not jolt.
Ŝ
Do not immerse in water.
Ŝ
Do not place near heat or expose to direct sunlight.
Ŝ
Aim the remote at the main unit.
Ŝ
Signal range is about 5 metres (directly ahead).
Ŝ
Ensure there is no obstacle obstructing the signal.
Ŝ
Signal is sent when key is released.
Ŝ
Unit beeps when signal is received.
Ŝ
If there is a light in the way, range may be shorter.
Summary of Contents for UltraPure AP33
Page 1: ...P N 784003680 00R ...
Page 38: ......
