background image

filter tab

LENGTH  OF WARRANTY

WHIRLPOOL WILL  PAY  FOR

ONE-YEAR FULL WARRANTY 

Labor and any parts of your range hood (except light bulbs and

From Date of Purchase

filters) which are defective in materials or workmanship.

WHIRLPOOL WILL  NOT  PAY  FOR

A. Any labor costs incidental to the replacement of defective parts.

B. Consumable parts such as light bulbs and filters.

C. Service calls to:

1. Correct the installation of the range hood.
2. Instruct you how to use the range hood.
3. Replace house fuses or correct house wiring.

D. Repairs when range hood is used in other than normal, single-family household use.

E. Pickup and delivery. This product is designed to be repaired in the home.

F. Damage to range hood caused by accident, misuse, fire, flood, act of God or use of products not approved

by Whirlpool.

8

Care of range
hood

Filter/light lens:
For best results, remove and clean
often.

To remove filter/light lens:

WHIRLPOOL AND INGLIS LIMITED DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES.

Some states or provinces do not allow the exclusion or limitation of incidental or

consequential damages, so this exclusion or limitation may not apply to you. 

This warranty gives you specific legal rights, and you may also have other rights which may vary from state to
state or province to province.

Outside the United States and Canada, a different warranty may apply. For details, please contact your
authorized Whirlpool  dealer.

Whirlpool Range Hood Warranty

Pull firmly on filter tab to remove
filter/light lens from range hood.

To clean filter/light lens: 

Place filter/light lens in
dishwasher or hot sudsy water to
clean.

Non-vented installation:

Turn filter/light lens so that
charcoal filter pad is facing up. Lift
tabs and remove charcoal filter
pad. Discard charcoal filter pad if

it needs replacing. Place filter/light
lens in dishwasher or hot sudsy
water to clean. Lift tabs and place
charcoal filter pad in filter/light lens.

To reinstall filter/light lens:

Place edge of filter/light lens in
opening so that right side is
above flange and tab faces
downward. Press filter/light lens
into position.

When it's time to replace your 
aluminum filter/light lens, or charcoal
filter pads:

1.  For model series RH3730 and

RH3736:

Order Aluminum Filter/Light
Lens No. 883103.

Order Charcoal Filter Pads 
No. 883151.

2.  Call Whirlpool's Telesales line

at 1-800-442-9991.

3.  Give the Telesales

Representative the part
number needed.

4.  The Representative will give

you the current price.

5.  Place your order using your

Master Card

®

, Visa

®

or

Discover

®

credit card.

6.  If you wish: mail a check or

money order to:

Whirlpool Corporation
1900 Whirlpool Drive
LaPorte, IN 46350-9980
Attn: Accessory Accounting

7.  Be sure to ask the Telesales

Representative about the wide
variety of other Whirlpool
Product Accessories.

Care of blower motor:

Clean exterior of motor with a
damp cloth and grease-cutting
detergent.

Note: Fan motor has lifetime
sealed bearings that never need
oiling under normal usage. A few
drops on each bearing after three
years of heavy usage will prolong
the motor life.

Exterior surfaces

Clean the range hood with a mild
detergent and soft cloth. Do Not
use abrasive cleansers or steel
wool pads.

Light

Do Not use bulb larger than 75
watts in light socket.

Light bulb is not included.

YL20378/8285186  6/18/02  10:43 AM  Page 8

Summary of Contents for RH3730 Series





















Reviews: