background image

1- 6

WARRANTY

ONE-YEAR FULL
WARRANTY

FROM DATE OF
PURCHASE.

LENGTH OF
WARRANTY:

WHIRLPOOL
WILL PAY FOR:

FSP

®

 replacement

parts and repair
labor costs to
correct defects in
materials or work-
manship. Service
must be provided
by an authorized
Whirlpool service
company.

WHIRLPOOL

WILL NOT PAY FOR:

A. Service calls to:

1. Correct the installation of the clothes vitalizer.
2. Instruct you how to use the clothes vitalizer.
3. Replace house fuses or correct house wir-

ing.

B. Repairs when the clothes vitalizer is used in

other than normal, single-family household use.

C. Pickup and delivery. The clothes vitalizer is

designed to be repaired in the home.

D. Damage to the clothes vitalizer caused by acci-

dent, alteration, misuse, abuse, fire, flood, acts
of God, or use of products not approved by
Whirlpool.

E. Repairs to parts or systems resulting from unau-

thorized modifications made to the clothes
vitalizer.

F. Replacement parts, or repair labor costs for

units operated outside the United States.

WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES.

 Some states or provinces do not allow the exclusion or limitation of incidental

or consequential damages, so this exclusion or limitation may not apply to you. This warranty
gives specific legal rights and you may also have other rights which vary from state to state or
province to province.

Outside the United States and Canada, this warranty does not apply.  Contact your autho-
rized Whirlpool dealer to determine if another warranty applies.

If you need service, refer to the “Diagnosis & Troubleshooting” section. After checking “Diagnosis
& Troubleshooting,” additional help can be found by calling the Whirlpool Customer Interaction
Center telephone number, 

1-866-MYVALET (1-866-698-2538)

, from anywhere in the U.S.A., or

write:

Whirlpool Corporation,
Customer Interaction Center
553 Benson Road
Benton Harbor, MI 49022-2692

Summary of Contents for Personal Valet PVBN600

























































Reviews: