8
3-Wire Cable from Home Power Supply to 3-Wire Cable
from Cooktop - U.S. only
IMPORTANT:
Use the 3-wire cable from power supply where local
codes permit connecting the frame-ground conductor to the
neutral (white) junction box wire.
1.
Connect the 2 black wires together using the UL listed wire
connectors.
2.
Connect the 2 red wires together using the UL listed wire
connectors.
3.
Connect the green or bare cooktop cable wires to the white
(neutral) wire in the junction box using the UL listed wire
connectors.
4.
Install junction box cover.
Attach Cooktop to Countertop
NOTE:
This section applies only if you are using clamp brackets.
1.
Place the 2½" (6.4 cm) clamping screws into the brackets.
2.
Check that the cooktop is still level.
3.
Use a flat-blade screwdriver to tighten the screws against the
countertop. Do not overtighten.
Complete Installation
1.
Check that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
2.
Check that you have all your tools.
3.
Dispose of/recycle all packaging materials.
4.
Use a mild solution of liquid household cleaner and warm
water to remove waxy residue caused by protective shipping
material. Dry thoroughly with a soft cloth. For more
information, see the “Cooktop Care” section of the
Use and Care Guide.
5.
Read “Cooktop Use” in the cooktop Use and Care Guide.
6.
Reconnect power.
NOTE:
If the cooktop does not work after turning on the power,
check that a circuit breaker has not tripped or a household fuse
has not blown. See “Troubleshooting” section in the Use and Care
Guide for further information.
If you need Assistance or Service:
Please reference the “Assistance or Service” section of the Use
and Care Guide or contact the dealer from whom you purchased
your cooktop.
A. Red wires
B. Bare or green wire from
cooktop
C. 3-wire cable (from cooktop)
D. Junction box
E. White wire (from power supply)
F. UL listed wire connector
G. Black wire
H. UL listed or CSA approved
conduit connector
G
A
B
C
D
E
F
H
A. Glass cooktop
B. Cooktop base
C. Attachment screw
D. Clamp bracket
(extends far enough beyond
cooktop base to alllow installation
of clamping screws)
E. 2½" (6.4 cm)
clamping screw
F. Countertop
G. Foam seal
A
B
C
D
E
F
G
