Whirlpool GJC3034G, Owner'S Manual

Page: 15 / 42

2-3
cable from
power supply junction
box
bare or green
wire
cable from
power supply
junction
box
U.L. or CSA-listed
conduit connector
white wire
black wires
red wires
twist-on
connector
Where local codes do not permit connect-
ing the frame-ground conductor to the neu-
tral (white) junction box wire (used for all
Canadian installations):
1. Disconnect the power supply.
2. Connect the flexible, armored cable from
the cooktop to the junction box using a
U.L.- or C.S.A.-listed conduit connector,
and tighten the screws on the conduit
connector.
3. Connect the two black wires together;
then connect the two red wires together
using a twist-on connector.
4. Connect the green or bare ground wire
from the appliance cable to the grounded
wire in the junction box, or other grounded
connector using a twist-on connector.
5. Install a twist-on connector on the end of
the white wire.
1. Disconnect the power supply.
2. Connect the flexible, armored cable from
the cooktop to the junction box using a
U.L.- or C.S.A. -listed conduit connector
and tighten the screws on the conduit
connector.
3. Connect the green (or bare) appliance
cable wire with the neutral (white) wire in
the junction box using a twist-on connec-
tor.
4. Connect the two black wires together;
then connect the two red wires together
with a twist-on connector.
Grounded Neutral
twist-on
connector
black wires
white wire
red wires
bare or green
wire
cable from cooktop
cable from cooktop
U.L. or CSA-listed
conduit connector
Ungrounded Neutral
Where local codes permit connecting the
frame-ground conductor to the neutral
(white) junction box wire (not used for Ca-
nadian installations):