7
Complete Installation
1. Plug in freezer or reconnect power.
2. Push the freezer back into place.
3. Place a level on top of the freezer and check to see that it is
level. If you need to relevel the freezer see “Adjust the Door” in
the Use and Care Guide.
4. Check the position of the ice maker. If it is not straight, loosen
the bottom bracket screws and reposition the ice maker as
needed. Retighten the screws.
5. Place the flat wire shelf supplied with the freezer onto the
mullion basket frame and reinstall the basket clamp.
6. Open the lid of the portable ice bin. Place the bin in the left-
hand side of the storage bin.
7. Extend the storage bin slider rails. Place the lower storage bin
and ice bin on the rails.
8. Slide the storage and ice bin combination back into the
freezer.
9. Lower the arm on the ice maker and close the freezer door.
NOTE: Allow 24 hours to produce the first batch of ice.
Discard the first three batches of ice produced. For more
information see “Ice Maker” in the Use and Care Guide.
TROUBLESHOOTING
Try the solutions suggested in the Use and Care Guide to avoid the cost of an unnecessary service call...
The ice maker is not producing ice or not enough ice
■
Refer to the Troubleshooting section in the Use and Care
Guide supplied with your freezer.
Off-taste, odor or gray color in the ice
■
Refer to the Troubleshooting section in the Use and Care
Guide supplied with your freezer.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
WARNING
Excessive Weight Hazard
Use two or more people to move and install freezer.
Failure to do so can result in back or other injury.
Summary of Contents for EV209NBT - INSTALLATION 5-10
Page 8: ...8 Notes ...
