2
INSTALLATION REQUIREMENTS
Tools and Parts
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Parts Needed
■
Your freezer dealer has a kit available with a
¹⁄₄
" (6.35 mm)
saddle-type shutoff valve, a union, and copper tubing.
■
Or you can purchase a
¹⁄₄
" (6.35 mm) copper tubing with
shutoff valve and a
¹⁄₄
" (6.35 mm) compression fitting
(coupling).
■
Depending on water line connections, you may also need a
¹⁄₄
"
(6.35 mm) nut and
¹⁄₄
" (6.35 mm) ferrule.
Parts Supplied with Freezer
Remove the parts from the Ice Maker Adapter kit that was
supplied with your freezer. Check to see that these parts are
included.
Parts Supplied with Ice Maker Kit
Remove the parts from the ice maker kit. Check to see that all
parts are included. Some of the included parts will not be used for
this freezer.
IMPORTANT: Do not remove the tubing from the water valve. It
has been factory installed and leak tested. Do not move the
compression nut that connects the tubing to the valve or the valve
may leak after you connect it to the water supply.
*Not used in two door freezer
■
Cordless drill
■
¹⁄₄
" nut driver and drill bit
■
Flat-blade screwdriver
■
#2 Phillips screwdriver
■
⁷⁄₁₆
" and
¹⁄₂
" open-end
wrenches or two adjustable
wrenches
■
Small
³⁄₄
" round file
■
Tubing cutter
■
Scissors
■
Ruler
■
Level
■
Step stool (optional)
A. Long shutoff arm
B. Ice maker cover
C. Flat wire shelf
A
B
C
A. Ice maker
B. Ice bin*
C. Water valve with tubing
D. Fill tube (short)*
E. Gasket*
F. Short extension tube*
G. Metal water tube insert
H. Long extension tube*
I. Ice maker clips (2)*
J. Tubing clips (2)*
K. Water valve tubing clamp
L.
¹⁄₂
" hex-head sheet metal screws (4)
M.
³⁄₄
" hex-head sheet metal screws (2)
N.
¹⁄₂
" hex-head machine screws (2)
A
B
D
F
E
H
C
I
J
G
K
L
N
M
Summary of Contents for EV209NBT - INSTALLATION 5-10
Page 8: ...8 Notes ...
