Whirlpool Use and Care Guide–No-Frost Refrigerator-Freezer–Model ET16AK
4
RECOMMENDED GROUNDING METHOD
(See Figure 5)
A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused and properly grounded electrical supply is required.
Plug into a grounded three-prong outlet. Do not remove ground prong, do not use an adapter, and do not use
an extension cord. It is recommended that a separate circuit serving only this appliance be provided.
See individual electrical requirements and grounding instruction sheet in your literature package.
5. PLUG IT IN...
Prior to first use, and after removing all the
packaging and sales labels, clean your refrigerator.
Refer to “Cleaning Your Refrigerator”
(Pages 14 and 15).
4. CLEAN IT...
Remove the Consumer Buy Guid label, tape, and any
inside
labels before use.
To remove any remaining glue, do the following:
1. Rub briskly with thumb to make a ball and remove.
OR
2. Soak area with dishwashing detergent solution
(1teaspoon detergent in 1 quart warm water) before
removing glue as described in step 1.
3. REMOVE SALES LABELS...
Explosion hazard. Igni3on of rubbing
alcohol or inflammable or toxic solvents can
cause serious injury or death. Do not use
gasoline, carbon tetrachloride, etc. to clean
this product.
Installa/on
(Con/nued...)
Electrical Shock Hazard. Electricity can
cause death or serious injury. Always make
sure wall receptacle and plug are grounded
before plugging in refrigerator.
NOTE:
Do not remove any permanent instruc3on labels
inside your refrigerator. Do not remove the Tech Sheet
fastened under the refrigerator at the front
.
Plug It In (Figure 5)
