3
Whirlpool Use and Care Guide–No-Frost Refrigerator-Freezer–Model ET16AK
Installa/on
1. INSTALL IT PROPERLY...
2. LEVEL IT...
To level your refrigerator, do the following:
(See Figure 4)
1. To raise front, turn each screw to the right.
2. To lower front, turn each screw to the left.
3. Check with a level at base of refrigerator.
To properly install, do the following:
(See Figure 3)
1. Allow 3 inches (7.5 cm) between overhead
cabinets and the refrigerator top.
2. Allow at least an inch (2.5 cm) between the
refrigerator condenser and the wall.
3. Allow 1/2 inch (1.25 cm) on each side of the
refrigerator for ease of installation.
4. If the refrigerator is to be against a wall, leave
enough space so the door can open completely.
Excessive Weight Hazard. Heavy
refrigerators can cause serious injury
or death. Use two or more people
when moving refrigerator.
Crash Hazard. Unstable floors can cause
refrigerator to fall on a person. Make
sure refrigerator is installed and leveled
on a floor that can hold the weight.
Level It (Figure 4)
Install It Properly (Figure 3)
