Whirlpool Duet sport, Use & Care Manual

Page: 5 / 56

5
Installation clearances
■ The location must be large enough to allow the washer door
to be fully opened.
■ Additional spacing should be considered for ease of
installation and servicing. The door opens more than 90°,
and it is not reversible.
■
Additional clearances might be required for wall, door, and
floor moldings.
■ Additional spacing of 1" (25 mm) on all sides of the washer
is recommended to reduce noise transfer.
■ Companion appliance spacing should also be considered.
Washer Dimensions
50
¼
"
(1276 mm)
27"
(686 mm)
3 6"
(914 mm)
29
¼
"
(74 3 mm)
Recommen d e d installation spacing for custom un d ercounter
installation
The dimensions shown are for the recommended spacing.
Custom un d ercounter installation - Washer only
1"
(25 mm)
1"
(25 mm)
3 6" min.
(914 mm)
27"
(686 mm)
2" (50 mm)
Recommen d e d installation spacing for recesse d or closet
installation, with or without a pe d estal
The dimensions shown are for the recommended spacing.
Recesse d area or closet installation
48"
(1220 mm)
A B
3 "
(76 mm)
3 "
(76 mm)
1"
(25 mm)
4"
(102 mm)
29
¼
"
(74 3 mm)
48 in.
2
( 3 10 cm
2
)
24 in.
2
(155 cm
2
)
A. Side view - closet or confined area
B. Closet door with vents
Recesse d or closet installation - Washer on pe d estal
1"
(25 mm)
29¼"
(74 3 mm)
1"
(25 mm)
1"
(25 mm)
27"
(686 mm)
4"
(102 mm)
3 8" min.
(965 mm)
A B
A. Recessed area
B. Side view - closet or confined area