14
Changing Cycles and Options
Not all Options are available with all Cycles.
Cycles and Options can be changed anytime before START is
selected.
To stop a cycle an
d
select a new cycle
1.
Select PAUSE/CANCEL once.
2.
Select desired cycle.
3.
Select the desired OPTIONS.
4.
Select and hold START (for approximately 1 second) to restart
the washer at the beginning of the new cycle.
To cancel a cycle
1.
Select PAUSE/CANCEL twice.
2.
The washer powers down, the door unlocks, and clothes can
be removed.
NOTE:
If the water level or the temperature is too high, the washer
will drain automatically before the door unlocks.
To change Options after the cycle has starte
d
1.
Select PAUSE/CANCEL once.
2.
Select the desired OPTIONS. If the option is not available, the
machine will beep.
3.
Select and hold START (for approximately 1 second) to
continue the cycle.
To
d
rain the washer manually
1.
Select PAUSE/CANCEL.
2.
Select DRAIN/SPIN.
3.
Select and hold START (for approximately 1 second) to begin
the drain.
4.
When the spin is complete, the door unlocks. Items can be
removed from the washer.
Status Lights
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional item
to the wash cycle and when the controls are locked.
A
dd
ing items
You can add items to the washer after the wash cycle has started,
if the ADD A GARMENT status light is illuminated. All cycles have
this feature except Rinse/Spin, Drain/Spin, and Clean Washer.
To a
dd
items
1.
Select PAUSE/CANCEL. The washer door unlocks, and items
can be added.
2.
To continue the cycle, close the door and select and hold
START (for approximately 1 second).
NOTE:
To add garments after the ADD A GARMENT period is
over, the wash cycle needs to be canceled, the items added, and
a new wash cycle started.
Cycle Complete
The Cycle Complete light comes on after the cycle is complete.
The light will stay on until door is opened.
Locking controls
The Control Lock avoids unintended use of the washer. You can
also use the control lock feature to avoid unintended cycle or
option changes during a cycle. When LOCK/UNLOCK CONTROL
is illuminated, all buttons are disabled except for PAUSE/CANCEL
and START. You can lock the controls while the washer is
operating.
To lock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds.
The LOCK/UNLOCK CONTROL status light illuminates.
To unlock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds until the
LOCK/UNLOCK CONTROL Status light turns off.
Estimate
d
Time Remaining
The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load. The cycle time
will be extended if oversudsing occurs or the load is unbalanced.
The SUDs routine removes extra suds and assures proper rinsing
of your garments. During the unbalance routine the time displayed
may pause until this activity is complete, then resume with the
remainder of the cycle. The options you select will also affect the
cycle times that are shown in the Preset Cycle Settings table. The
Estimated Time Remaining can change up to 30 minutes under
extreme conditions. If a small load of clothing is run, the the
Estimated Time Remaining display will indicate 3 or more minutes,
but the cycle will finish immediately. If a large load of clothing is
run, the Estimated Time Remaining display may indicate 1 minute,
but the cycle will take approximately 5 minutes to finish.
Door Locke
d
When the status light illuminates, the door is locked. The door is
locked and unlocked automatically, depending on the stage of the
wash cycle.
Cycles
Wash Cycles
Choose Wash Cycles by rotating the Cycle selector knob to the
desired cycle. The indicator light for the cycle selected will
illuminate. Each cycle is designed for different types of fabric and
soil levels.
Summary of Contents for Duet sport
Page 55: ...55 Notes ...
