Whirlpool Cabrio WTW6200S, User Manual

Page: 26 / 84

3-6
ESTIMATED TIME REMAINING
When a wash cycle is started, the estimated
time remaining for the cycle, including fills and
drains, will be displayed. The time will count
down to the end of the cycle.
CYCLES
Turn the knob to choose the right wash cycle
for the type of fabrics you are washing. When
the knob points to a cycle, the indicator light
for the cycle will glow. If the default settings
for the Modifiers and Options are suitable for
your wash load, you may press Start to begin
the wash cycle.
PRESET CYCLE SETTINGS
For ease of use, preset cycle settings provide
the recommended fabric care settings for each
cycle.
To use the preset cycle settings:
1. Press POWER.
2. Select the cycle you want by turning the
knob. The preset cycle settings will be
displayed (see the chart).
NOTE: The times listed in the Preset Cycle
Settings chart are an estimate. Preset cycle
times may vary slightly depending on your
model.
3. Press START. The wash cycle will begin.
PRESET CYCLE SETTINGS
Cycle Preset
Minutes
Soil Level* Wash/Rinse
Temp
Whitest Whites 61 Heavy Hot/Cold
Heavy Duty 59 Heavy Hot/Cold
Normal 37 Normal Warm/Cold
Casual/Perm Press 37 Medium Warm/Cold
Colors/Darks 36 Normal Cool/Cold
Delicate 30 Medium Warm/Cold
Handwash/Wool 31 Light Cool/Cold
Rinse & Spin 24 Not
applicable
Not
applicable
Drain & Spin 12 Not
applicable
Not
applicable
* Cycle time in minutes will appear in the display while
you are making selections. The total cycle time will
appear, including an estimated time for drain and fill
times, once Start is pressed.
NOTE: Load only to the top of the basket.
Overloading can cause poor cleaning. See
“Starting The Washer.”
WHITEST WHITES
This cycle introduces liquid chlorine bleach
to the load at the proper time for improved
whitening of your heavily soiled white fabrics.
Cycle combines high-speed wash action and
high-speed spin speed. The default option set-
ting for this cycle is Extra Rinse to thoroughly
remove detergent and bleach. For maximum
soil and stain removal, liquid chlorine bleach
must be used.
HEAVY DUTY
Use this cycle for heavily soiled or sturdy items.
Cycle combines high-speed wash action and
high-speed spin. Deep Clean is the default op-
tion for this cycle, but it can be turned off. See
“Changing Cycles, Modifiers and Options.”
NORMAL
Use this cycle for normally soiled cottons and
linens, such as sheets, blankets and towels.
Cycle combines high-speed wash action and
high-speed spin.