Whirlpool B TNF 5323 W, Health & Safety, Use And Care And Installation Manual

Page: 403 / 424

EN
403
HOW TO USE
THE APPLIANCE
FIRST TIME USE
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically .
After starting the appliance, wait at least 4-6 hours
before placing food into the appliance .
When the appliance is connected to the power
supply, the display lights up and all the icons appear
on the display for approximately 1 second . The
default (factory) values of the fridge compartment
settings light-up .
TEMPERATURE SETTING
The appliance is normally factory-set for operation at
the recommended medium temperature .
For details of setting temperature - see the Daily
Reference Guide .
Note: Displayed set points correspond to the average
temperature throughout the whole refrigerator.
INSTALLATION
INSTALLING SINGLE APPLIANCE
To guarantee adequate ventilation, leave a space on
both sides and above the appliance .
The distance between the rear of the appliance and
the wall behind the appliance should be at least
50 mm .
A reduction of this space will increase the Energy
consumption of product .
50mm
50mm
INSTALLING THE SPACERS
Fit the spacers on the upper and bottom part of
condenser (according the drawing) at the rear of the
appliance .