1. There is a drainage outlet at the back of the unit.
Remove cover from the drainage outlet, and then connect drainage joint to it with screw.
2.
3. Connect the drain hose to the outlet.
Note:
Drain hose or tubing can be purchased locally to satisfy your particular needs.
Remove
Drainage outlet
Washer
Cover
Install
Drainage joint
Drain water (
S
tyle 1)
To get the maximum cooling efficiency, the air conditioner is designed to splash the condensation water on the
condenser coil.
If the splashing sound annoys you, you can provide an outside drain by using the following procedures, which may
however cause a small loss of performance.
Installation Instruction
Drain water (
S
tyle
2)
Slide out the chassis from the cabinet.
Remove the rubber plug from the body base plate.
Install the drain pan to the corner of the cabinet with 2 screws.
Connect the drain hose to the outlet on the drain pan bottom.
Ensure the drainage work well, pour 2-3 cup of water into the drainage system.
Slide the chassis into its original place in the cabinet.
To get the maximum cooling efficiency, the air conditioner is designed to splash the condensation water on the condenser
coil. Please install the drainage box when installing the air conditioner.
To the cooling only unit, If the splashing sound annoys you, you can provide an outside drain by using the following
procedures, which may however cause a small loss of performance.
1.
2.
3.
4.
5.
6.
Note:
Drain pan and drain hose must be installed before using reverse cycle models.
Drain hose or tubing can be purchased locally to satisfy your particular needs.
7
Summary of Contents for AWV07000R
Page 2: ......
