34
•
Precautions
1. Improper screwing of the screws may cause the troubles shown in Fig.5
2. If gap is still left between the ceiling and the panel after screwing the screws, readjust the height of the
indoor unit body (Refer to Fig.6)
• After fixing be sure no gap left between the ceiling and the panel
3. Wiring of the decoration panel.
Connect the joints for swing louver motor lead wire installed on the panel (Refer to Fig.7)
Fig 5
Air leak
Contaminator dew condensation, dew dripping
Air leak from ceiling
No gap is allowed
Adjustment of the indoor unit body from the
holes in the corner of the panel is possible if
the indoor unit is kept leveled and the
dreinage pipe piping etc is unaffected
Fig 6
Fig 7
motor wiring for auto louver
5-pole white connector
electric box
control board
motor wiring for auto louver
5-pole white connector
CN19
electric box
