N
C
M
Y
INSTALLATION
Technical information for the installer
The appliance must be installed by a qualified
electrician following the manufacturer’s instructions and
in compliance with local regulations in force.
To fit the cooktop into the unit make an opening of
the dimensions given in the figure, remembering that:
− inside the unit there must be a space of at least 30
mm between the bottom of the cooktop and the
top of an appliance or bracket.
− any wall to the side and above the cooktop must
be at least 50 mm away.
− the wall behind the cooktop must be at least 50
mm away.
− when there is a wall unit or hood above the
cooktop there must be at least 650 mm between
the cooktop and the unit or hood.
− the coatings of the walls of the unit or appliances
near the cooktop must be heat resistant (“
Y
”
protection against heating in compliance with
standards EN 60335-2 6). The cooktop can then be
put near to walls which are higher than it is (min.
50 mm).
Do not install the cooktop near inflammable
materials (e.g. curtains).
36
36
