background image

CLICK & CLEAN - CLEANING THE GLASS

After removing the door and resting it on a soft surface with the 

handle downwards, simultaneously press the two retaining clips 

(1) and remove the upper edge of the door by pulling it towards 

you (2).

1

2

Lift and firmly hold the inner glass with both hands, remove it 

and place it on a soft surface before cleaning it (3).

3

 

To correctly reposition the inner glass, make sure that the “R” is 

visible in the left-hand corner and the clear surface (not printed) 

is facing up. First insert the long side of the glass indicated by “R” 

into the support seats, then lower it into position (4). Refit the 

upper edge (5): a click will indicate correct positioning. 

Make sure the seal is secure before refitting the door.

  5 

TROUBLESHOOTING

Problem

Possible cause

Solution

The oven does not work

Power cut

Disconnection from the

mains

Check for the presence of mains electrical

power and whether the oven is connected to 

the electricity supply.

Turn off the oven and restart it to see if the 

fault persists

Policies, standard documentation and additional product information can be found by:

• 

Visiting our website 

docs . whirlpool . eu

• 

Using QR Code

• 

Alternatively, 

contact our After-sales Service

 (See phone number in the warranty 

booklet). When contacting our After-sales Service, please state the codes provided on your 

product's identification plate.

XXXXXXXXXXXXXX 

Model: xxxXXXXxx

 

 Download the complete Use and Care Guide from 

docs. whirlpool .eu

 for more informations about your product

400011538239

Summary of Contents for AKP 605 IX

Page 1: ...ing to cook food we therefore recommend heating the oven with it empty in order to remove any possible odors Remove any protective cardboard or transparent film from the oven and remove any accessories from inside it Heat the oven to 250 C for about one hour The oven must be empty during this time Please note It is advisable to air the room after using the appliance for the first time FUNCTIONS OF...

Page 2: ... the end of cooking the symbol switches off an alarm sounds and AUTO flashes on the display A U T O Press any button to deactivate the alarm Return the function knob and thermostat knob to and then press the time button for at least 2 seconds to switch off the oven PROGRAMMING THE END COOKING TIME DELAYED START After selecting cooking time press the time button the display shows END cooking end ti...

Page 3: ...re Guide from docs whirlpool eu for the table of tested recipes compiled for the certification authorities in accordance with the standard IEC 60350 1 CLEANING AND MAINTENANCE Make sure that the oven has cooled down before carrying out any maintenance or cleaning Do not use steam cleaners Do not use wire wool abrasive scourers or abrasive corrosive cleaning agents as these could damage the surface...

Page 4: ...e correct positioning Make sure the seal is secure before refitting the door 4 5 TROUBLESHOOTING Problem Possible cause Solution The oven does not work Power cut Disconnection from the mains Check for the presence of mains electrical power and whether the oven is connected to the electricity supply Turn off the oven and restart it to see if the fault persists Policies standard documentation and ad...

Reviews: