5
normal for a small amount of wate r to come out of the salt container.
It is
1. The salt container must only be refilled when the salt warning light in the control panel comes on.
Depending on how well the salt dissolve s, the salt warning light may still be on even though the
salt container is filled.
If there is no salt warning light in the con trol panel (for some Mode ls),you can estimate when to fill
the salt into the softener by the cycles that the dishwasher has run.
2. If there are spills of the salt, a soak or a rapid program should be run to remove the excessive sa lt.
Always use the salt intended for use with dishwasher.
The salt contain er is located beneath the lower basket and should be fill ed as explained in the
following:
Attention!
Only use salt spe cif ically desi gne d for t he use i n dishwashers! Every other type of
salt not speci fically de sig ned fo r the u se in a d ishwasher, espe cially table salt, will
damage the w ater sof tener. I n case of damages caused by the use of unsuitable
salt t he ma nuf act urer does not give any wa rranty nor is liable for any damages caused.
Only fil l wi th salt just b efore starting one of the co mp let e washing p rograms.
This wi ll prevent any g rains of salt or salty wate r, which ma y have been spilled,
remaining on the bottom of the machi ne for any period of time, which may cause
corrosi on.
B. Loading the Salt Into the Softener
C. Fill the Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can leave
spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is designed to
use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser. To fill the
dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black.
The volume of the rins e aid container is about 110ml.
Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dis penser with any o ther substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
A
Remove the lower basket and then unscrew and remove the cap from the salt container.
B
Before the first wash, fill 1lt. of water in the salt container of your machine.
C
Place the end of the funnel (supplied) into the hole and introduce about 1kg of salt.
D
After filling the container , screw the cap tightly back clockwise.
E
Usually, the salt warning light will stop being illuminated within 2-6 days afte r the salt container ha s been filled with
salt.
F
Immediately after filling the salt into the salt container, a washing program should be started (We su ggest to use the
soak or rapid program). Otherwise the filter system, pump or other important parts of the machine may be damaged
by salty water. This is out of warranty.
All manuals and user guides at all-guides.com
