13
Premise:
1. A cycle that is underway can only be modified if it has on ly been running
for a short time. Otherwise, the detergent may have already been released,
and the appliance may have already drained the wash water. If this is the case,
the detergen t dispenser must be refilled (see the s ection entitled " Loading the
Detergent " ).
2. Pre ss current prog. Button more tha n 3 seconds to cancel the program ,
then you can change the program to the desired cycle setting (see the section
entitled " Starting a wash cycle. . . " ).
3. Pre ss one of others prog. B utton more than 3 seconds to cancel the runing program ,
translase the program which you press.
4. Pre ss the display button more tha n 3 seconds to re-edit disp lay time .
WARNING!
It is dan gerous to open the door when washing, because the hot water may scald you.
When the wo rking cycle has finished, the buzzer o f the dishwasher will sound for 8 seconds, the n stop. Turn off
the appl iance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait for a few mi nutes before unlo adi ng th e di shw asher to avoid ha ndling the dishes and utensil s while they
are still hot and more susceptible to break age. They w ill al so d ry better.
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should therefore be a llowed to cool down arou nd 15 minutes
before removing from the appliance.
Open the dish was her's door, leave it aj ar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwashe r is wet insid e.
Empty the lower basket first and then the upper one. This will avoid water dripping fro m the upper Bas ket onto
the dishes in the lower one.
Turning On the Appliance
Change the Program...
Forgot to Add a Dish?
At the End of the Wash Cycle
Starting a cycle wash
1
Draw out the lower and up per basket, load the dish es a nd push them back.
It is commended to lo ad the lower basket first, then the upper o ne (s ee the section e ntitled
Loading the Dishwashe r ).
2
Pour in the d etergent (see the section entitled
Salt, Detergent and Rinse Aid
).
3
Inse rt the plug in to the socket. The power supply is 220-240 VAC /50 HZ , the specification of the
socket is 10A 25 0VAC. Make sure that the wa ter supply is turned on to full p ressure.
4
“
”
“
”
Ope n the doo r, p ress the ON/OFF button, and the ON/OFF light will turn on.
Press the progra m button to a sired wash cycle . and close th e d oor . After 3 seconds, the machine will work.
A forgotten dish can be added at any time before the detergent cup opens.
Load the forgotten dishes.
Close the door, the dishwasher will start running again
after 10 seconds.
After the spray arms stop working,you can open the door
completely.
2
Open the door a little to stop the washing.
1
3
4
2.Turn off the water tap!
1.Switch o ff the dishwasher by pressing the ON/OFF bu tton.
Th e buzzer of the dishwasher moos for 8 secon ds, o nly in th is ca se the p rogramme has en ded .
Switch Off the Dishwasher
All manuals and user guides at all-guides.com
