Whirlpool 940 series, Use And Care Manual

Page: 6 / 72

6
Starting a wash cycle
1. Load the dishwasher. See the “Loading
Your Dishwasher” section.
2. Spin the spray arms. They should
turn freely.
3. Add detergent. See the “Using
the Dispensers” section.
4. Add rinse agent, if needed.
5. Close door firmly until it latches.
Stopping the dishwasher
You can stop your dishwasher anytime
during a cycle. All you have to do is:
•
Open the door slightly. Wait for any filling
or spraying action to stop before opening
the door all the way. Close door to con-
tinue cycle.
OR
• Press Cancel/Drain. Once pressed, a
2-minute drain starts.
6. Run hot water at the sink nearest the
dishwasher until water is hot.
Turn water off.
7. Press a Cycle pad. If desired, press one
or more Option pads. The
dishwasher starts filling once
you press a Cycle pad unless
you select the delay wash
cycle. You may press Option
pads as the machine is filling.
The pad indicator glows red when a cycle
or an option is selected.
S T A R T I N G Y O U R D I S H W A S H E R